自上料攪拌車是一種工程機械，齒輪是其組成零部件之一。齒輪能夠轉動就是因為上齒輪和下齒輪之間要形成一對良好的傳動關系，只有兩者之間的銜接到位了，所以它的運行才能是一個平穩的關系。而打齒其實就是兩個金屬質地的齒輪之間的硬碰硬，導致齒輪的齒冠部分加快磨損，時間長了、次數多了，本來直角的齒冠就會被磨成圓角，入擋之后咬合就會出現問題，稍微震動很容易就出現掉擋現象。那么，您知道為什么攪拌斗會出現打齒的情況嗎？
Self loading mixer is a kind of engineering machinery, and gear is one of its components. The reason why the gear can rotate is that a good transmission relationship should be formed between the upper gear and the lower gear. Only when the connection between the two is in place, can its operation be a stable relationship. In fact, tooth beating is the hard collision between two metal gears, which leads to the accelerated wear of the crown of the gear. For a long time and many times, the original right angle crown will be ground into rounded corners. After entering the gear, there will be problems in the bite, and it is easy to fall off when it vibrates a little. Then, do you know why the mixing bucket has teeth beating?
正常情況來說，車輛中都會有同步器存在，它的作用便是高轉速齒輪與即將進入到當時檔位齒輪同步的部件。咱們都知道在倒擋情況下，產生打齒現象的次數反而會增加，這首要由于在攪拌斗中沒能安裝同步器，因此在停止的狀態下，齒輪之間的差速器就會隨之變小，這樣倒擋就會比較順利.

Normally, there will be synchronizer in the vehicle, which is used to synchronize the high-speed gear with the gear that is about to enter the current gear. We all know that under the condition of reverse gear, the number of tooth beating will increase. This is mainly due to the failure to install the synchronizer in the mixing bucket. Therefore, under the stop state, the differential between the gears will become smaller, so the reverse gear will be more smooth
攪拌斗出現打齒問題除了螺旋傘齒、嚙合副本身質量、調整間隙不正確以外，不正確的操作流程是導致攪拌斗出現打齒問題的首要原因。
In addition to the incorrect quality of spiral bevel gear, meshing pair and adjustment clearance, the incorrect operation process is the primary reason for the toothing problem of the mixing bucket.
自動上料攪拌車可實現上料、攪拌、運輸以及卸料的全過程，攪拌車自動上料、自動裝料、自動抽水、定量加水、自動攪拌，自動化程度是非常高的。尤其是在鄉村道路施工過程中用途非常大，但是，作為工程車輛而言也是需要維護保養的，畢竟工作環境比較差，很容易引發一些故障，自動上料攪拌車的維護費用還是不能忽視的，其他用戶反映的維護費用也大不相同
The automatic loading mixer can realize the whole process of loading, mixing, transportation and unloading. The mixer can automatically load, automatically load, automatically pump water, quantitatively add water and automatically mix, and the degree of automation is very high. Especially in the process of rural road construction, it is very useful. However, as an engineering vehicle, it also needs maintenance. After all, the working environment is poor and it is easy to cause some faults. The maintenance cost of automatic loading mixer can not be ignored, and the maintenance cost reflected by other users is also very different
以上就是自動攪拌車給大家的精彩內容，更多的精彩內容請點擊：http://www.southwestoralmyo.com我們后續會有更多的精彩內容等您查看.
The above is the highlights of the automatic mixer. For more highlights, please click: http://www.southwestoralmyo.com We will have more wonderful content for you to check later